Tired of film consumption? Effe3Ti offers you SPINNY S300 and S350 Easy Touch: our saving answer.
> Perfect for fragile loads > Strong and perfect for high production > Economic and easy pallet wrapping
The powered prestretch, significantly reduces the film consumption, it means low cost of package, low environmental impact.
Easy film roll changement, less than 80” no passage throgh the rolls required
> Touch screen control panel with 10 programs Pre-programmed
> Password protected programming
> Motorized pre-stretch motor up to 300%
> Manual cycle
> Turntable stop in phase
> Turntable speed controlled by inverter (from 5 to 10 rpm) with progressive start and stop
> Film holder speed regulated by inverter (separated regulation for rise and descent)
> Automatic pallet height detection with sensor
| Wrapping height up to | mm 2100 |
| Rotating turntable diameter | mm. 1500 |
| Turntable load capacity | Kg. 1200 |
| Electrical supply | 230 V - 50 Hz. single phase |
| Maximum pallet dimensions | mm. 1200x1000 |
> Electronic board and Control Panel with 5 different wrapping cycles
> Motorized pre-stretch motor up to 300%
> Turntable stop in phase
> Turntable speed controlled by inverter (from 5 to 10 rpm) with progressive start and stop
> Film holder speed regulated by inverter (separated regulation for rise and descent)
> Automatic pallet height detection with sensor
| Wrapping height up to | mm 2100 |
| Rotating turntable diameter | mm. 1500 |
| Turntable load capacity | Kg. 1200 |
| Electrical supply | 400 V - 50 Hz. single phase |
| Maximum pallet dimensions | mm. 1200x1000 |
Wrapping height up to 2600 - 3100mm
Turntable diameter 1800 – 2200 mm
Turntable load capacity 2000 kg
Pre-stretch gears for particular needs
Easy access ramp
Frame to sink the machine into the ground
Transport sleeves
Shoe-horse turntable for pallet loading with pallet jack
Trolley guide and lock