Forni
> TS 32/G, TS 32/E

thermo-shrinking film

TS 32/G - natural gas

Hood type thermo shrink machine to be used with natural or LPG gas, designed to heat and shrink the film covering the loads assuring stability and wheater proof protection. Shrink hood and cover device are designed to reduce power consumption and to prevent exit of combusted gases which are directly conveyed into a chimney placed on the top of the hood.

TS 32/E - electric

Hood type thermo shrink machine electrical powered.

Technical data >

GAS supply	Natural gas, LPG
Electrical supply	400 V, 50 Hz 10,3 Kw/hour (7,2 Kw/hour during pre-heating time)
Pre-heating time	30 min
Max. power of heaters	34 Kw
Max. load dimensions	mm. 1200x1000
Max. load height	mm. 1500

Electric >

400 V, 50 Hz 10,3 Kw/hour
(7,2 Kw/hour during pre-heating time)

Optionals >

> Safety guards, 2000mm height, positioned to allow entering from the front of the machine
> Aspirator to be placed beneath the thermo shrink oven in order to facilitate the attachment of the film on the lower part of the load. This option comes with an access ramp