

Film carrier with MOTORISED PRE-STRETCH
It allows you to wrap light and unstable products that would not be wrapped with traditional systems. The stretch film is dispensed in the right quantity by rollers driven by a motor controlled by an electronic system that measures the speed and keeps the film tension constant over the entire wrapped product.
The motorized pre-stretch system ensures a variable stretch up to 400% in the 2-motor version.
Product height detected by photocell
Customisable film carrier SPEED
Anti-fall device on film carrier


Electronic control panel with 10 password protected wrapping cycles
Separate programming of high and low reinforcement wraps
Arm rotation regulated by inverter from 4 to 15 rpm
Standard pallet dimensions 1200×1200
Arm stop position controlled by sensor
ON REQUEST
Automatic film cutting at the end of the cycle
Photocell for black or reflective products
Motorised or pneumatic top press
WATCH THE PICTURES


DESIGNED AND PRODUCED BY EFFE3TI
Semi-automatic wrapping machine with rotating arm, with motorized pre-stretch for the best use of the stretch film on the product.
Rotary arm wrapping machines offer higher productivity (pallets / hour) than rotary table wrapping machines.
SPECIFICATIONS
- Standard model is designed to wrap with stretch film, pallet of products having dimensions of 1200x1200mm with unlimited load capacity.
- Standard height 2100mm detected by photocell; height on request up to 3000 mm
- Arm rotation regulated by inverter (from 4 to 15 rpm)
- Arm position regulated by sensor.
- Film carrier speed regulated by inverter
- Anti-fall system on the film carrier